Saved Screens & Datasets
Any displayed screen can be stored into memory by using the "Save
Screen" button on the front panel.
Fluke 434: 50 screen shots. Fluke 433: 25 screen shots.
An entire dataset including the associated trends or events can be
stored by pressing the "Memory" button on the front panel.
Fluke 434: 10 datasets. Fluke 433: 5 datasets.
Transients
A maximum of 40 graphical events can be captured on the Model 434.
Dips & Swells
A maximum of 999 textual events can be captured when in "detail" mode.
Normal mode will compress to less as events can be sub-events of the
main listing.
General Trending
| Duration |
30 Minutes |
2.5 Hours |
7.5 Hours |
15 Hours |
30 Hours |
150 Hours |
| Resolution |
1 Second |
5 Seconds |
15 Seconds |
30 Seconds |
60 Seconds |
5 Minutes |
| Duration |
450 Hours |
900 Hours |
75 Days |
225 Days |
450 Days |
| Resolution |
15 Minutes |
30 Minutes |
60 Minutes |
3 Hours |
6 Hours |
Memory 1800 min, max, and avg. points for each reading
Dips & Swells Trend Function
| Duration |
90 Seconds |
180 Seconds |
6 Minutes |
12 Minutes |
30 Minutes |
1 Hours |
| Resolution |
25 mSeconds |
50 mSeconds |
100 mSeconds |
200 mSeconds |
500 mSeconds |
1 Second |
| Duration |
2.5 Hours |
7.5 Hours |
15 Hours |
30 Hours |
150 Hours |
450 Hours |
|
| Resolution |
2.5 Seconds |
7.5 Seconds |
15 Seconds |
30 Seconds |
2.5 Minutes |
7.5 Minutes |
| Duration |
900 Hours |
75 Days |
225 Days |
450 Days |
| Resolution |
15 Minutes |
30 Minutes |
1.5 Hours |
3 Hours |
Memory 3600 min, max, and avg. points for each reading
In-Rush Trend Function
| Duration |
7.5 Seconds |
15 Seconds |
30 Seconds |
90 Seconds |
| Resolution |
25 mSeconds |
25 mSeconds |
25 mSeconds |
25 mSeconds |
| Duration |
180 Seconds |
6 Minutes |
12 Minutes |
30 Minutes |
| Resolution |
50 mSeconds |
100 mSeconds |
200 mSeconds |
500 mSeconds |
Memory 3600 min, max, and avg. points for each reading
Monitor Mode
Minimum period is 2 hours.
Maximum is 7 days.
A maximum of 1000 textual events can be captured. There are 6
threshold sets available: 2 factory installed sets, 2 sets only
definable by the administrator via FlukeView software, and 2 sets that
can be changed on the Analyzer
|
